Attention!!!

1. This product comes without a manual, If you don’t know how to use it, please contact us.         
2. The color of the box is red or blue. If you mind, please contact us first.
3. We don't ship to the following area from our European warehouse
*Spain: Canary Island,Balearic Islands
*France: French Polynesia, Reunion Island
*Portugal: Madeira & Azores
4. The container may have dents or cracks during transportation,but does not affect the use of tools, please understand

Description:

Designed to charge the turbo system with a low pressure of regulated workshop air to show the presence of leaks within the system.Can also be used on cooling systems pipe.
Helps locate air leaks in turbo system components by plugging the output side of the turbo and the intake inlet.
Pressure loss can be located easily by hand or leakage spray.
4 pairs of stepped adapters to fit most turbo systems on cars and light trucks. Adapters range from 1-3/8''(35mm) to 3-1/2''(90mm)
Pressure gauge with shut off valve & regulator to help prevent over pressurisation.

Please check the Sizes of 4 Pairs of Stepped Adapters:

35, 40, 45 mm (1.38'', 1.57'', 1.77'')
50, 55, 60 mm (1.97'', 2.17'', 2.36'')
65, 70, 75 mm (2.56'', 2.76'', 2.95'')
80, 85, 90 mm (3.15'', 3.35'', 3.54'').

Operation：

Select the correct adapter by first measuring the hose diameter.
Set regulator of tester to 5psi to check for large leaks with valve, open (operating handle inline with the hose axis). And with the air coupling disconnected.
Select correct size adapters and place in hoses,then tighten the clamp
Connect the air coupling to check for leaks at the pre-set (5psi). If a leak is identified audibly, it indicates that the system has a fault resulting in loss of pressure.
If no leaks are evident, regulate pressure to 10psi.
If no leaks are evident, regulate pressure to a maximum of 15psi or to the manufacturer’s maximum pressure and retest.
If the gauge pointer remains stationary for one minute it will indicate that system works good.
Release the pressure in the system by rotating the ball valve lever to align with hose axis.
Disconnect the quick coupler, clean and return all items to carry case.

Listing Includes:

1PCS Pressure Gauge (with a shut off ball valve, a pressure release valve, air coupling and air inlet)
8PCS Plastic Stepped Adapters(35mm - 90mm)
1PCS Storsge Case